Recently, my sister-in-law, Teresa, moved back “home”. She had wanted to do so for probably 30 years, but life wouldn’t let her. Things in life change. She went back to school and became an RN. Her sons are grown men. Life just kinda opened up for her, and home she came. We’ve all been blessed by her return, because she is such a beautiful and fun person. A momentous occasion such as this deserves a monumental gift. But alas, Mr. Matrimony and I are having a moratorium on spending this month. Fortunately for Teresa, I have copious amounts of purple spray paint and purple is her favorite color! Also, I’ve been wanting to do some kind of commemorative crafty venture in celebration of one of the catapults that started me on my blog… my first Pin. Well, it’s the first Pin I remember. I’d be surprised if any Pinterest follower hasn’t Pinned this Pin and was equally impressed by it. Here’s the Pin I’m speaking of….
I’m not sure who the original Pinner was, but the idea and picture came from http://www.shanty-2-chic.com/. If you haven’t seen their blog, what is wrong with you??? Get on over there and check it out!
Anyways, I really wanted to do something that was my own idea infused with this one. After searching the
dungeon basement for some inspiration to go along with my copious amounts of purple spray paint, I stumbled (Quite literally. We really need to clean up down there) across a lid from a brown square biscuit tin. The color of the lid reminded me of these little doohickies I bought at Lowe’s eons ago….
By-the-way, always, always ask at a manager at Lowe’s if they can go any lower on the clearance price. The day I found these doohickies (which are technically “Decorative Corner Plates”, or fancy trim pieces made to look like wood), the manager had just found out he needed to reset an entire aisle two weeks earlier than her previously thought. He had to get rid of stuff FAST! So, he told me any clearance stuff I wanted that day, I could have an additional 90% off. You can guarantee Mr. Matrimony and I were moving around those clearance displays like nobodies business! The doohickies turned out to be .10 cents for a package of four. We bought like two dozen packages. For reals! I didn’t know what I’d do with them, but I knew they needed to go home with me.
So, here’s what you’ll need for this project….
- Tin lid (round, square, any shape will be fine)
- Small bottle (I found this one at the dollar store
- Threaded Bolt with No Head
- 2 Nuts and Bolts to Fit the Flange Outer Holes
- Decorative Trim (not necessary, but it really adds to the cute factor)
- Small Wire (not pictured, sorry!)
To make this much easier, take the following picture to your hardware store when you are purchasing supplies. I do not know the technical names and I don’t want you feeling as silly as I would have had I not been with Mr. Matrimony. He translated for me. He speaks Wifeish and Tool Guy. Tell the guy you need to make sure all the pieces fit together. . He’ll make sure they fit for you.
You’re welcome 😉
- Large Nail
- Wire Cutters
- Spray Paint
- Icky Paint Brush (not pictured)
- Epoxy (hot glue may be ok for this project, I just don’t know for certain)
First, decide how you will place the trim and bottle on your tin. Do you want the bottle hanging below the trim? Do you want it symmetrical? I didn’t really even think about how mine would go together, because it just kinda went the way it did. I don’t know how I would’ve placed anything differently. When you are certain of how you want it, Place the flange (the thingie with the 3 holes) where it will be on the lid. Make two marks where the bolts will go. Remove the piece and hammer the big nail all the way through both marks. Remove the nail, it’s only to make the holes.
This is usually something I would say to use a drill with. I decided on a different route for two reasons…
- Way too many people have said to me if they have to use a drill on something, they probably won’t make it. I totally get that and I used to be the same way (before Mr. Matrimony and his totally organized tool room). So, even though I am now a drill girl, I thought a different way of making these holes would be appropriate here 🙂
- Mr. Matrimony wasn’t home and I couldn’t contact him to ask which drill bit to use on metal
Adhere the decorative piece to the lid. Wait for the epoxy (or glue) to dry thoroughly. Next, physically distress the tin piece. Whack it with a hammer, the claw of the hammer, scratch it, dent it, put little nail holes almost all the way through…. whatever you want… like this….
Now give it a good coat of paint. Primer first if you want. I didn’t want the primer showing through when I distressed it. Let the first coat dry all the way. It may take a little extra time with the tin. It did with mine! Here’s what it looks like with one coat….
Quite by accident, I have a new way of distressing. I did this repair job in our sink at our rental house. The brush that came with the kit was not so great (hairs kept coming out!) so I used my nice little brush I use for painting precarious parts of walls and trim. To make sure I keep my nice little brush nice, I bought an expensive brand of brush cleaner. Turns out it wasn’t worth the extra cost! Not intentionally, I left the nice little brush in a container with the cleaner in it for over two weeks. I checked it yesterday, and it is still coated with this enamel stuff that I used to repair the sink. I felt it, and the brushes kinda just all mush together. Ruined!
Or was it???
Nope! I now have a brand new use for my not-so-nice little brush! I simply took it out of the cleaner, wiped it on my painting table to make it not so wet, and brushed it onto the wet paint on the lid. I did it several times until I got the desired look.
It was pretty neato! As a bonus, I don’t even have to clean the brush. It just gets placed back into the container with the cleaner, and my next project will get a whole different patina… I feel next to genius!
Thank me! Thank me very much!!!
Let the whole thing dry until it is super dry, not ADHD dry. Like, even overnight. After it is super dry, you can (finally) attach the hardware. The flangie thing goes on first. Put the bolts through but don’t put the nuts on them yet.
Before you put the nuts on, you are going to make the hanger part that you’ll use to hang it from the wall. Turn the piece over, and wrap the end of your little piece of wire around one of the bolts. Leave the amount of slack you want (about an inch and a half) and wrap the other end of wire around the other bolt. Twist the wire good around itself on either end, so it won’t slip. On top of the wire, place the nuts. Tighten them as tight as you can so the flange won’t move around and so the wire will be super secure. The back will look like this….
Now you can continue putting the hardware on the front together. Here’s how it goes….
NOTE: I will change how I did this project with the next one I do. When I hung mine up, it kind of bent down with the weight of the jar when it was full of water. To make it sturdier, next time I’ll cut a little board to fit into the back side of the lid. I’ll use screws instead of bolts which will not only attach the flangie thing to the lid, but it will also attach the lid to the piece of wood. Also, I’ll use a regular wall hanger or attach a similar wire one with screws going into the board from the back side.
That’s it! Now you have utter cuteness to hang on your own wall! Please people…. share! Share pictures with me of what you have done! I’d so enjoy seeing them. Now, here’s some of mine….